A decorative piece spelling "Vino" rests on a countertop, next to a bottle of wine in a marble cooler, a wine decanter, and a potted plant. The setup feels like an IKEA Wine Bar Cabinet hack against the backdrop of a chic white brick wall.
| | | | | |

IKEA Wine Bar Cabinet Hack

ByLisa

It’s week 5 of the One Room Challenge and I am on time this week! It was a quick turnaround, but I made it! This week I tackled the one and only piece of furniture in this tiny room, an IKEA wine bar cabinet hack. But before we dive into how I did this simple hack, check out week one, week two, and week three to catch up on the plans and progress. Now let’s dive into how I gave this IKEA piece a custom look.

A modern wine bar cabinet boasts a rack brimming with diverse bottles and a chic wooden "Vino" sign on top. Decorative items enhance its charm. Text overlay declares, "IKEA Wine Bar Cabinet Hack" with an accompanying website link for this creative transformation.This post contains affiliate links. For more information, please see my policies.

IKEA Wine Bar Cabinet Hack

Last week I left off with the walls finally in place! Now I need to add all the details that will really transform this small room that is barely the size of a closet into a legit wine cellar room.

A narrow, empty hallway with white brick walls and a slanted ceiling. Embracing basement wall ideas not drywall, a potted plant with tall, grass-like leaves sits on a wooden stool against the brick wall. The floor remains plain and unfinished.

If you recall back to week one, this wine cabinet was already stashed in this corner. I did not build this. I found it years ago at a thrift store for $15 and snagged it for overflow wine storage. I always intended to make it over, but never got around to it.

A black wooden wine rack with a lattice design stands upright in a garage or workshop, reminiscent of an IKEA Wine Bar Cabinet hack. Surrounding the rack are various tools, wooden planks, and orange buckets. Shelves with materials are visible in the background.

I started out by sanding the wine rack down. I only intended to scuff it up a bit so I could paint it, but when I saw the light wood grain peeking through, I knew that was the best idea. I only sanded down the frame, as the inside would have been impossible.

A wooden wine rack with a black grid design stands upright in a cluttered garage, resembling an IKEA Wine Bar Cabinet hack. The background features Home Depot buckets, stacked wood, tools, and shelves.

After I sanded the wine rack down, I covered the outside in plastic and tape so I could use the paint sprayer to update the inside of the wine rack. I used Iron Ore which is the same color I used on the ceiling.

In the workshop, an IKEA wine rack undergoes a stylish transformation into a chic wine bar cabinet. Painted black with precision, its crisscross design is neatly outlined by blue tape. Tools and paint surround this innovative hack, promising a sleek addition to any decor.

This wine rack became the base of my great idea. But I also wanted to incorporate storage for my grandma’s crystal wine glasses. Naturally I headed straight to IKEA furniture. This should come as no surprise since I never turn down a a good IKEA hack and I didn’t have time to build anything from scratch. Enter the IKEA Enhet wall cabinet, essentially kitchen cabinets.

A minimalist white wall cabinet with a sleek, modern design serves as an ideal IKEA wine bar. It features a single open shelf for storage and the other side enclosed, perfect for stowing bottles. The cabinet has clean lines and a glossy finish, making it an effortless hack for any space.

I considered several other IKEA items like the Ivar cabinets and the Billy bookcases but they were just a little bit too big. I also considered using my IKEA bar cart hack I did several years back, but it too was not a good fit. Other great IKEA pieces for small spaces like the Tarva dresser, and Rudsta cabinet were also a no go.

If you do not have a wine rack like this one at your disposal, IKEA makes a few different inserts for the Kallax that would work really well for this easy IKEA hack and create a very similar look.A tall, 8-compartment wood bookshelf stands upright. To the right, two white insert panels with multiple slots are shown, one with intersecting parts for organizing or dividing shelf space. Channel your inner designer and transform this versatile piece into an IKEA wine bar cabinet hack.

The plan was to add the IKEA Enhet cabinet to the top of the wine rack turned horizontally on it’s side.

A garage workshop showcases a DIY IKEA wine bar cabinet hack, with a completed wooden cabinet featuring a black lattice pattern on the bottom and open white storage space on top. Various tools, ladders, and materials are scattered in the background, hinting at ongoing creative projects.

It wasn’t quite tall enough so I decided it needed some legs. I was originally planning to use hairpin legs as I have done many times before, but I realized I had some wooden legs leftover from another project. I drilled some holes into scrap 2x4s and screwed the legs in. I painted them the same color as the inside of the wine rack, Iron Ore.

Tools for a DIY project are on display: a paint can with a stirring stick, three black-painted cups upside down on wood blocks, sponge brushes, and a power drill with screws. A protective sheet covers the background—a perfect setup for your next IKEA wine bar cabinet hack.

Once the table legs were dry, I flipped over the wine rack and attached them to the under side.

A wooden wine rack, part of an IKEA wine bar cabinet hack, lies upside down on a black tarp in a workshop. It features black lattice for bottles and four inverted legs, with various tools and materials scattered in the background.

Next I addressed the Enhet cabinet doors. I really wanted to tie in the wood tone from the wine rack so I decided to add my go to detail, pole wrap. I had this left over from the bed I made for our room. You can see the full tutorial in my bed frame for an adjustable base. I cut the pole wrap with my miter saw and glued it to the doors with wood glue.

A workshop table with a wooden panel coated in glue showcases an IKEA Wine Bar Cabinet Hack in progress. The Titebond Ultimate Wood Glue stands nearby, surrounded by various tools and materials like paint cans and brooms, hinting at the creativity unfolding.

I let the glue dry overnight with some weights on top.

In a garage filled with tools and equipment, weights rest on a table supported by boards. Nearby, shovels and brooms lean against a plywood wall. It's an unexpected setting for an IKEA wine bar cabinet hack, blending practicality with creativity in the heart of this workspace.

Then I added some flat black finger pulls for a high end look. I may or may not have stolen these from my IKEA rast dresser hack. Relax, I ordered more and will replace them. No IKEA desk hack was harmed in the making of this cool home bar, haha!

A power drill, screwdriver, and pencil lie on a white panel against a black tablecloth, ready for the ultimate IKEA wine bar cabinet hack. A yellow tape measure is nearby. Posters with years from 1922 to 1970 are visible in the background, adding a vintage touch to this DIY project.

Now I needed to address the gaps between the ends of the IKEA Enhet cabinet and the end of the wine rack. The easiest idea I had was to make faux panels. I started making some boxes out of 2×4 scraps.

In the workshop, a wooden cabinet frame is under construction, showcasing lattice detailing and exposed hinges. This IKEA hack combines sections of white and natural wood, reimagining it as an elegant wine bar. Visible in the background are the garage door and various tools.

I then cut down two more pieces of wood to the size of the gaps. I used scrap wood from my bed build. I chose not to finish the ends for two reasons. One, this bar cabinet would be sandwiched between two walls and would not be seen. Two, it was the easy way and didn’t require me to buy more wood. However, if I later decide it’s necessary, I can always add matching end panels. 

A partially assembled wooden cabinet with a wine rack section sits on a black tarp in the workshop, showcasing the beginnings of an IKEA wine bar hack. Wooden boards and construction materials fill the background, while a bicycle hangs casually on the wall.

The final piece to my great IKEA hack was a bar top. I picked up a project panel from my local hardware store and ripped it down to size on my table saw. I then painted it to match the rest of the wine cabinet. While I did not use furniture paint, you definitely can, but I think ordinary wall paint works just fine too.

A large, rectangular spruce project panel with visible wood grain stands upright, wrapped in clear plastic. Labeled by "Metrié" for its dimensions and DIY potential, it's a perfect start for your next IKEA Wine Bar Cabinet hack.

To attach all the components I used my nail gun. I centered the Enhet cabinet on top of the wine rack first and then attached the two with nails. Then I secured the faux side panels to the 2×4 boxes. Once they were in place, I made sure my cabinet doors would still open and close before attaching the 2×4 boxes to the wine rack through the bottom 2×4. I attached the bar top last by nailing up through the 2×4 box into the top.

A close-up view of an empty wooden frame sitting on a wooden surface evokes thoughts of an IKEA Wine Bar Cabinet hack. The unfinished frame showcases the natural wood grain, while the background is softly blurred, with some pipes visible above.

I may come back and add some contact paper to the inside of the cabinets for a fun and different look on the inside and to hide the tiny nail holes. But for now, I have created a great way to to store all my crystal glasses and wine of course 😉 

A cozy wine nook with a brick wall highlights an IKEA wine bar cabinet hack, featuring a rack brimming with bottles, a wooden "Vino" sign, and a plant in a geometric pot. Wine glasses are neatly stored behind glass doors, while a bottle and two decanters are artfully on display.

In less than a week I gave this old wine rack a complete overhaul and an all new look! It’s amazing how far a little paint, some new hardware and a little effort can go! Now I have my own bar in what is soon to be a wine room!

A creative IKEA Wine Bar Cabinet Hack transforms a wooden wine rack filled with various bottles against a white brick wall. Topped with a "Vino" sign and a small potted plant, this setup combines functionality with style.

What do you think? Did I meet my goals and create the perfect bar with a modern look for this small space?

Week 5 summary

  • installed the ceiling light
  • refinished the wine cabinet
  • added an IKEA cabinet for storage
  • made a custom wine bar cabinet

A small wine nook showcases a modern black and wood wine rack, akin to an IKEA Wine Bar Cabinet Hack. It elegantly holds several bottles, adorned with a "Vino" sign and a plant. The white brick wall behind complements the scene, enhanced by the warm glow of a gold light fixture above.

Next week I hope to tackle the basement flooring and at least start on the custom wall wine rack. If you want to see all the behind the scenes and video content, make sure you follow me on Instagram!

A wine rack with multiple bottles is set against a white brick wall. Above it, an IKEA wine bar cabinet hack features a wooden shelf displaying a potted plant, a sign reading "Vino," and a bottle of wine next to empty glasses.

A renovated wine rack display, resembling an IKEA wine bar cabinet hack, stands against a white brick wall. Below, the wooden rack holds bottles, while a "Vino" sign and plant adorn the top. An inset reveals the previous yellow design, highlighting its stylish transformation.

A modern wine display showcases an IKEA Wine Bar Cabinet Hack with a built-in rack for several bottles. Above the sleek cabinet, a wooden "Vino" sign complements a geometric plant holder. The textured white brick wall serves as a charming backdrop.

Join me again next week to see how the rest of the wine room is coming along! Fingers crossed I can knock out a lot this week, because I am still behind. This wine room may or may not have a door in week 8. To be continued….

A cozy home wine storage area features an IKEA wine bar cabinet hack, a wine rack stocked with bottles, a small cabinet adorned with a plant, and a charming wooden "vino" sign. An open bottle of wine and two glasses rest nearby, all set against white brick-style wallpaper.

If you enjoyed this post, IKEA Wine Bar Cabinet Hack, please share it on Facebook or hover over an image and save to Pinterest! And if you don’t already follow me on Instagram, Pinterest, or Facebook, I would love for us to be friends! Want to see more fabulous IKEA hacks? Sign up here to get notifications delivered straight to your inbox so you never miss one!

 

 

Don’t forget to stop by the One Room Challenge to check out all the other participants! There are so many talented designers with incredible ideas.  It’s basically like binge watching HGTV. You’re welcome 😉  

Garrison Street Design Studio - IKEA Wine Bar Cabinet Hack

Stylish wine bar showcasing an IKEA wine bar cabinet hack with a black and wood design. Wine bottles are arranged in a cross-grid shelf, complemented by a small plant in a geometric holder, a wooden "Vino" sign, and two bottles topped with a glass.

This post, IKEA Wine Bar Cabinet Hack appeared first on Garrison Street Design Studio.

Leave a Reply

Your email address will not be published. Required fields are marked *